Written by
Adrian Soto Appliance Repair Content SpecialistPublished September 5, 2026Updated October 20, 2026
Error code6C6
ApplianceWasher
Quick answer
6C6 on a front load washer dryer combo points to the detergent level sensor. Pump clean is the first step.
Model compatibility: Samsung reuses codes across series and model years, so 6C6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Detergent level sensor moistures or failure (washer-dryer combo).
6C6 is a Samsung information code on front load washer dryer combos. It means the detergent level sensor has moisture on it or has failed. Samsung’s India page covers it, and notes that other models may use different codes, so check the manual for your exact model number.
What to do
Run the pump clean operation. If the code stays on the display, contact Samsung customer care.
Nearby codes
Its twin is 6C7, the softener level sensor code, which has the same pump clean advice. Another 6-series code, 6E, is listed as a water heater fault on a different Samsung table.
Samsung washer service in Los Angeles
If 6C6 will not clear on your combo unit, contact us in Los Angeles at (310) 896-4231 or look at washer repair. Please have the model number, the code and a note that you ran pump clean.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Samsung appliance?
Book a specialist visit for a clear estimate and approval before any repair.
