Samsung Washer SUd Error Code

SUd tells you the washer has detected an over-sudsing condition. It can also display as 5UD, Sd, 5d, SUdS or 5Ud5. The washer stops for a short period so the suds can dissipate, and the cycle then continues by itself. The code may flash again at the end of the cycle as a reminder.

It is not a fault

Samsung says this code does not indicate that service is needed. It comes from incorrect use of detergent, so the useful step is to review how much detergent goes in and whether it is the right kind.

If the code keeps appearing

1. Check that the supply hoses and the drain hose behind the washer are not kinked.
2. Run an empty cycle with no additives, such as detergent or fabric softener, and watch for suds.
3. If suds appear, too much detergent or a non-HE detergent has been used. Keep running empty cycles until the suds are gone, then see whether the code returns.
4. If no suds appear but the code continues, visit Samsung’s Support Center to request service.

Related codes

• Ub and Ur: unbalanced load, another code that pauses a cycle without meaning a failure.
• SDC: the detergent drawer is not fully closed.

Samsung washer repair in Los Angeles

When the empty cycles do not clear the code, Samsung washer repair in Los Angeles is available on (310) 896-4231. Have the code, the model number and the detergent you use ready.

Source: Samsung US – Washer information and error codes; Samsung Latin America (EN) – Washing machine information and error codes